Ease of installation makes these cost-effective systems excellent for retrofit applications. Our guarantees are positive fluid control, less downtime and lower maintenance cost.
For cyanoacrylates, anaerobics and other low to medium viscosity fluids.
For small deposits of UV adhesives and other low viscosity fluids.
For pastes, greases and sealants.
For microdots of silicone oils, UV-cure adhesives, inks and accelerators.
For microdot applications.
For industrial sealants and grease at fluid inlet pressures up to 2500 psi.
For coatings of lubricants, activators and inks. Fan and round patterns with diameters 3/16" to 3.0 inches.
For coating inside walls of cylinders 1 to 12 inches in diameter.
For solder paste.
The interactive ValveMate™ 7000 controller puts complete dispense valve control where it is needed — near the dispense valve. Use the 7000 to cycle the 702, 725, 736, 741, 752 and 754 Series dispense valves.
Feature | Benefits |
Microprocessor circuitry | When signal to start the dispensing cycle is received, its time program takes over and completes the cycle without the need to reprogram a PLC |
Feed lines can be purged and deposit size | On-the-fly deposit adjustment |
Valve open time adjustment in increments as small as 0.001 second | Exceptional process control |
Contact Us |
If you would like to obtain more info and learn more of its applications, please contact us. |